Spatial Confinement of Co Nanoparticles in N-Doped Carbon Nanorods for Wastewater Purification via CaSO3 Activation.

Spatial confinement of organic pollutants and reactive oxygen species (e.g., SO4•- and •OH) with ultrashort lifetime inside the scale of chemical theoretical diffusion could provide a greatly promising strategy to overcome the limitation of mass transfer in the heterogeneous Fenton-like oxidation process. Herein, we first reported spatial confinement of cobalt nanoparticles in N-doped carbon nanorods (Co-NCNRs), by encapsulating Co nanoparticles into N-doped carbon nanorods, in activating CaSO3 for antibiotic degradation. Compared to Na2SO3 and NaHSO3, CaSO3 could slowly and persistently discharge SO32- due to its low solubility, thus avoiding the depletion of the generated SO3•- and •OH under the high concentration of sulfite ions. Fully physical characterizations confirmed that the 3D hydrogel was mostly transformed into the nanorod structure of Co-NCNRs at 550 °C. Co atoms were successfully nanoconfined into N-doped carbon nanorods, which contributes to mass transfer and prevents the agglomeration of Co nanoparticles, thus enhancing its catalytic activity and stability in activating CaSO3 for water decontamination. The catalytic performance, kinetic research, influences of inorganic anions, pH, and degradation mechanism of chlortetracycline degradation catalyzed by the Co-NCNRs/CaSO3 system have been studied in detail. This work not only proposed a facile method for synthesis of nanoconfined catalyst but also provided an excellent Co-NCNRs/CaSO3 system for wastewater treatment.

Inhibition of biofouling by in-situ grown zwitterionic hydrogel nanolayer on membrane surface in ultralow-pressurized ultrafiltration process.

Ultralow-pressurized ultrafiltration membrane process with low energy consumption is promising in surface water purification. However, membrane fouling and low selectivity are significant barriers for the wide application of this process. Herein, an ultrathin zwitterionic hydrogel nanolayer was in-situ grown on polysulfone ultrafiltration membrane surface through interfacially-initiated free radical polymerization. The hydrogel-modified membrane possessed improved biological fouling resistance during the dynamic filtration process (bovine serum albumin, Escherichia coli and Staphylococcus aureus), comparing with commercial polysulfone membrane. The enhanced biofouling resistance ability of zwitterionic hydrogel nanolayer was derived from the foulant repulsion of hydration shell and the bactericidal effect of quaternary ammonium, according to the results of foulant-membrane interaction energy analyses and antibacterial performances. In surface water treatment, the zwitterionic hydrogel layer inhibited biofouling and resulted in the formation of a loose and thin biofilm. In addition, the hydrogel-modified membrane possessed 22% improvement in dissolved organic carbon (DOC) removal and 134% increasement in stable water flux, compared to commercial polysulfone membrane. The in-situ grown zwitterionic hydrogel nanolayer on membrane surface offers a prospectively alternative for biofouling control in ultralow-pressurized membrane process.

Spatial Confinement of Pt Nanoparticles in Carbon Nanotubes for Efficient and Selective H2 Evolution from Methanol.

H2 generation from methanol-water mixtures often requires high pressure and high temperature (200-300 °C). However, CO can be easily generated and poison the catalytic system under such high temperature. Therefore, it is highly desirable to develop the efficient catalytic systems for H2 production from methanol at room temperature, even at sub-zero temperatures. Herein, carbon nanotube-supported Pt nanocomposites are designed and synthesized as high-performance nano-catalysts, via stabilization of Pt nanoparticles onto carbon nanotube (CNT), for H2 production upon methanol dehydrogenation at sub-zero temperatures. Therein, the optimal Pt/CNT nanocomposite presents the superior catalytic performance in H2 production upon methanol dehydrogenation at the expense of B2(OH)4, with the TOF of 299.51 min-130 oC. Compared with other common carriers, Pt/CNT exhibited the highest catalytic performance in H2 production, emphasizing the critical role of CNT in methanol dehydrogenation. The confinement of Pt nanoparticles by CNTs is conducive to inhibiting the aggregation of Pt nanoparticles, thereby significantly increasing its catalytic performance and stability. The kinetic study, detailed mechanistic insights, and density functional theory (DFT) calculation confirm that the breaking of O─H bond of CH3OH is the rate-controlling step for methanol dehydrogenation, and both H atoms of H2 are supplied by methanol. Interestingly, H2 is also successfully produced from methanol dehydrogenation at -10 °C, which absolutely solves the freezing problem in the H2 evolution upon water-splitting reaction.

Using waste to treat waste: facile synthesis of hollow carbon nanospheres from lignin for water decontamination.

Lignin, the most abundant natural material, is considered as a low-value commercial biomass waste from paper mills and wineries. In an effort to turn biomass waste into a highly valuable material, herein, a new-type of hollow carbon nanospheres (HCNs) is designed and synthesized by pyrolysis of biomass dealkali lignin, as an efficient nanocatalyst for the elimination of antibiotics in complex water matrices. Detailed characterization shows that HCNs possess a hollow nanosphere structure, with abundant graphitic C/N and surface N and O-containing functional groups favorable for peroxydisulfate (PDS) activation. Among them, HCN-500 provides the maximum degradation rate (95.0%) and mineralization efficiency (74.4%) surpassing those of most metal-based advanced oxidation processes (AOPs) in the elimination of oxytetracycline (OTC). Density functional theory (DFT) calculations and high-resolution mass spectroscopy (HR-MS) were employed to reveal the possible degradation pathway of OTC elimination. In addition, the HCN-500/PDS system is also successfully applied to real antibiotics removal in complex water matrices (e.g. river water and tap water), with excellent catalytic performances.

In-modified Sn-MOFs with high catalytic performance in formate electrosynthesis from aqueous carbon dioxide.

Electrochemical reduction of carbon dioxide (CO2ER) has become an effective solution to relieve the energy crisis and tackle climate change. In this study, a series of tin-based organic frameworks modified by In (Sn-MOF/Inx) were successfully synthesized via a simple hydrothermal method and explored for high formate-selective CO2ER. The pure Sn-MOF exhibits maximum formate selectivity with a faradaic efficiency (FEformate) of approximately 85.0% and a current density of 15 mA cm-2 at -1.16 VRHE, while the In (6%)-modified Sn-MOF (Sn-MOF/In6) delivers a much higher maximum FEformate (around 97.5%) and a current density of 16 mA cm-2 at -0.96 VRHE. Remarkably, the Sn-MOF/In6 exhibits a significantly larger specific surface area (183.3 m2 g-1) compared to the Sn-MOF (65.2 m2 g-1). These findings indicate that introducing In, an alien element with a slightly different outer orbital electron number from that of Sn, can significantly boost the selectivity and activity for CO2ER to formate. This study presents an efficient way to modify MOF catalysts through a well-designed introducing process.

Quantitative probing of reactive oxygen species and their selective degradation on contaminants in peroxymonosulfate-based process enhanced by picolinic acid.

The processes of Fe(III) activated peroxymonosulfate (PMS) in degrading contaminants have been extensively studied. Herein, a biodegradable chelating agent, picolinic acid (PICA), was introduced to the PMS/Fe(III) process to improve the reaction efficiency. The emphases of this study were placed on the quantification of steady-state concentrations of reactive oxygen species (ROS). Experiments presented that five types of ROS, including Fe(IV), SO4•-, HO•, 1O2 and O2•- coexisted in this system. Four typical probe compounds were used to quantify the steady-state concentration of ROS under different variables. The steady-state concentration of Fe(IV) ([Fe(IV)]ss) was 3-5 orders of magnitude higher than that of other ROS, followed by 1O2 and SO4•-, whereas HO• had the lowest concentration. The reaction between PMS and PICA was first explored in our study and results showed that 1O2 and O2•- would form in this reaction. Owing to the hybrid oxidation by multiple ROS, this system showed high oxidation capacity, and could effectively degrade a variety of pollutants. The contributions of ROS to the alleviation of pollutants varied depending on their concentrations and specific reactivity of substrates. Generally, organic contaminants with phenol structures were prone to react with Fe(IV). Overall, this study compared the steady-state concentrations of different ROS and revealed the intrinsic ROS formation mechanisms.

Facile synthesis of S, N-co-doped carbon dots for bio-imaging, Fe3+ detection and DFT calculation.

Turning waste into wealth, herein, two highly fluorescent N and S co-doped carbon dots (N, S-CDs-A and N, S-CDs-B) were synthesized by the hydrothermal reaction of contaminant reactive red 2 (RR2) and L-cysteine or L-methionine, respectively. The detailed morphology and structure of N, S-CDs were characterized by XRD, Raman spectrum, FTIR spectra, TEM, HRTEM, AFM and XPS. The maximum fluorescent of N, S-CDs-A and N, S-CDs-B are 565 and 615 nm under different excitation wavelengths with moderate fluorescence intensity of 14.0 % and 6.3 %, respectively. The microstructure models of N, S-CDs-A and N, S-CDs-B, which were induced by FT-IR, XPS and element analysis, had been applied in DFT calculation. The result indicated that the doping of S and N is beneficial to obtain the red-shift of fluorescent spectra. Both N, S-CDs-A and N, S-CDs-B showed highly sensitive and selective to Fe3+. N, S-CDs-A can also detect Al3+ ion with high sensitivity and selectivity. Finally, N, S-CDs-B was successfully applied in cell imaging.

Mechanistic insight into efficient H2 generation upon HCOONa hydrolysis.

Sodium formate (SF) is regarded as a technological additive to improve H2 generation upon HCOOH dehydrogenation. The development of SF as a hydrogen storage material is still a challenge. Herein, we report the design and synthesis of carbon nanosphere-stabilized Pd nanoparticles (Pd/CNS) for the direct H2 generation upon SF hydrolysis in the presence of Fe3+. The tandem reaction, isotopic mass spectrometry, and gas chromatograms result confirmed that SF hydrolysis generates H2 with one H atom provided by SF and other H by H2O. The kinetic study and detailed mechanistic investigations have demonstrated that the concerted process between the cleavage of O-H bond in H2O and -O2C-H bond oxidative addition is the rate-controlling step in SF hydrolysis. This work offers a new chemical hydrogen storage material (HCOONa) for the high-efficiency generation, transport, and storage of H2.

A comparative study on Fe(III)/H2O2 and Fe(III)/S2O82- systems modified by catechin for the degradation of atenolol.

The processes of Fe(III) activated persulfate (PS) and H2O2 modified by catechin (CAT) had been shown to be effective in degrading contaminants. In this study, the performance, mechanism, degradation pathways and products toxicity of PS (Fe(III)/PS/CAT) and H2O2 (Fe(III)/H2O2/CAT) systems were compared using atenolol (ATL) as a model contaminant. 91.0% of ATL degradation was reached after 60 min in H2O2 system which was much higher than that in PS system (52.4%) under the same experimental condition. CAT could react directly with H2O2 to produce small amounts of HO• and the degradation efficiency of ATL was proportional to CAT concentration in H2O2 system. However, the optimal CAT concentration was 5 µM in PS system. The performance of H2O2 system was more susceptible to pH than that of PS system. Quenching experiments were conducted indicating that SO4•- and HO• were produced in PS system while HO• and O2•- accounted for ATL degradation in H2O2 system. Seven pathways with nine byproducts and eight pathways with twelve byproducts were put forward in PS and H2O2 systems respectively. Toxicity experiments showed that the inhibition rates of luminescent bacteria were both decreased about 25% after 60 min reaction in two systems. Although the software simulation result showed few intermediate products of both systems were More toxic than ATL, but the amounts of them were 1-2 orders of magnitude lower than ATL. Moreover, the mineralization rates were 16.4% and 19.0% in PS and H2O2 systems respectively.

Facile synthesis of lead-tin nanoparticles for electrocatalyzing carbon dioxide reduction to formate.

A series of Pb-Sn catalysts were synthesized via facile chemical reduction for electrocatalytic CO2 reduction (ECR). The optimized sample (Pb7Sn1) achieved 90.53% formate faradaic efficiency (FE) at a potential of -1.9 V vs. Ag/AgCl. Electrochemical and material evaluation reveals that its high performance can be attributed to the rich active sites exposed by the high specific surface area of the electrode. In addition, the synergy between Pb and Sn is also a strong contributor to the high selectivity of formate. This work provides some insights into the preparation of simple and efficient ECR catalysts.

Structure-evolved YbBiO3 perovskites for highly formate-selective CO2 electroreduction.

The electrochemical reduction of CO2 (ERCO2) into economically valuable chemicals is one of the most promising ways to achieve carbon neutrality. Perovskite materials have shown potential applications in high-temperature catalysis and photocatalysis due to their unique structure, but their catalytic performance during the aqueous ERCO2 has rarely been investigated. In this study, we developed an efficient YbBiO3 perovskite catalyst (YBO@800) for CO2 conversion to formate, with a maximum faradaic efficiency of 98.3% at -0.9 VRHE, as well as a considerable faradaic efficiency (>90%) over a wide potential range (from -0.8 to -1.2 VRHE). Further analyses demonstrated that the structural evolution of YBO@800 occurred during the ERCO2 process, and the subsequent construction of the Bi/YbBiO3 heterostructure played a significant role in optimizing the rate-determining step of the ERCO2. This work inspires the development of perovskite catalysts for the ERCO2 and provides insight into the influence of the surface reconstruction of catalysts on their electrochemical performance.

Facile Synthesis of Tetraphenylethene (TPE)-Based Fluorophores Derived by π-Extended Systems: Opposite Mechanofluorochromism, Anti-Counterfeiting and Bioimaging.

Although remarkable progresses are achieved in the design and development of the mono-shift in photoluminescence for mechanofluorochromic materials, it is still a severe challenge to explore the opposite mechanofluorochromic materials with both blue- and red-shifted photoluminescence. Herein, two unprecedented 4,5-bis(TPE)-1H-imidazole fused pyridine or quinoline-based fluorophores X-1 and X-2 were designed and synthesized, and X-1 and X-2, exhibit completely opposite mechanofluorochromic behavior. Under UV lamp, the color of pristine X-1 changed from blue to green with reversible redshifted 27 nm in fluorescence emission spectra after ground, while the color of pristine X-2 changed from red to yellow with reversible blue-shifted 74 nm after ground. The detailed characterizations (including PXRD, SEM and DSC) confirmed that this opposite mechanofluorochromism was attributed to the transformation of order-crystalline and amorphous states. The crystal structure analysis and theoretical calculation further explain that opposite mechanofluorochromic behavior take into account different π-π stacking mode by induced π-extended systems. In addition, these TPE-based fluorophores (X-1 and X-2) exhibited excellent bio-compatibility and fluorescence properties for bio-imaging, writable data storage and anti-counterfeiting materials.

Semiconductor photocatalysts: A critical review highlighting the various strategies to boost the photocatalytic performances for diverse applications.

The photocatalytic technology illustrates an eco-friendly and sustainable route to overcome environmental and energy issues. The successful construction of a photocatalyst depends on four key elements: light absorption ability, the density of active sites, redox capacity, and photoinduced electron-hole recombination rate. Sincemost of intrinsic semiconductor photocatalysts cannot meet all these requirements, they are often modified to boost their photocatalytic properties. Many strategies have been adopted to design novel and efficient photocatalysts for diverse applications. Herein, we review the most efficient of these strategies and methods focused on effectively overcoming the efficiency limitations of photocatalysts to promote their large-scale application. Subsequently, a particular aim is put on the most current studies for photocatalytic applications, including CO2 reduction, N2 fixation, H2 evolution, and pollutants degradation. Finally, key challenges and future perspectives in designing and implementing semiconductor photocatalysts for large-scale applications are discussed. Therefore, it is foreseen that this review will work as a guide for future research and provides a variety of strategies to develop novel and high-performance photocatalysts for various applications.

Microbiota signatures associated with invasive Candida albicans infection in the gastrointestinal tract of immunodeficient mice.

Candida albicans is a commensal microorganism in the human gut but occasionally causes invasive C. albicans infection (ICA), especially in immunocompromised individuals. Early initiation of antifungal therapy is associated with reduced mortality of ICA, but rapid diagnosis remains a challenge. The ICA-associated changes in the gut microbiota can be used as diagnostic and therapeutic targets but have been poorly investigated. In this study, we utilized an immunodeficient Rag2γc (Rag2-/-il2γc-/-) mouse model to investigate the gut microbiota alterations caused by C. albicans throughout its cycle, from its introduction into the gastrointestinal tract to invasion, in the absence of antibiotics. We observed a significant increase in the abundance of Firmicutes, particularly Lachnospiraceae and Ruminococcaceae, as well as a significant decrease in the abundance of Candidatus Arthromitus in mice exposed to either the wild-type SC5314 strain or the filamentation-defective mutant (cph1/cph1 efg1/efg1) HLC54 strain of C. albicans. However, only the SC5314-infected mice developed ICA. A linear discriminate analysis of the temporal changes in the gut bacterial composition revealed Bacteroides vulgatus as a discriminative biomarker associated with SC5314-infected mice with ICA. Additionally, a positive correlation between the B. vulgatus abundance and fungal load was found, and the negative correlation between the Candidatus Arthromitus abundance and fungal load after exposure to C. albicans suggested that C. albicans might affect the differentiation of intestinal Th17 cells. Our findings reveal the influence of pathogenic C. albicans on the gut microbiota and identify the abundance of B. vulgatus as a microbiota signature associated with ICA in an immunodeficient mouse model.

ZnO Nanorods Grown on Rhombic ZnO Microrods for Enhanced Photocatalytic Activity.

In this paper, the formation of rhombic ZnO microrods surrounded by ZnO nanorods was realized on the surfaces of zinc foils using a hydrothermal method. The photocatalytic degradation of Rhodamine B solution was used to test the photocatalytic performance of the prepared samples. Compared with the rhombic Zn(OH)F and ZnO microrods grown on zinc foils, the hierarchical micro/nanostructures formed by ZnO nanorods surrounding the surfaces of rhombic ZnO microrods have better photocatalytic performance. The experimental results are mainly due to the fact that the hierarchical ZnO micro/nanostructures formed by ZnO nanorods surrounding the surface of the rhombic ZnO microrods have a larger surface area compared with the rhombic Zn(OH)F and ZnO microrods. More importantly, the photocatalytic circulation experiments indicate that ZnO nanorods grown on rhombic ZnO microrods can be recycled and have a relatively stable photocatalytic performance.

Asymmetric Core-Expanded BOPYOs: Facile Synthesis and Optical Properties.

N,O-bidentate BF2 complexes with five- and six-membered core rings have been thoroughly investigated. However, the development of seven-membered N,O-boron complexes is still an area to be explored. We have developed BF3 ⋅ OEt2 -induced self-condensation and coordination reactions based on a single starting material, which had been elucidated by experiment and calculation. This parent asymmetric core-expanded borondifluoride-(Z)-1,3-di(1H-pyrrol-2-yl)but-2-en-1-one (BOPYO) showed reactivity with a wide range of aldehydes, thus providing a series of conjugation BOPYOs. Moreover, a BOPYO derivative with a dimethylamino group was developed as a new NIR dye that responds to acid with favorable photophysical properties based on intramolecular charge transfer effect.

Induction of high affinity monoclonal antibodies against SARS-CoV-2 variant infection using a DNA prime-protein boost strategy.

BACKGROUND: Calls for the coronavirus to be treated as an endemic illness, such as the flu, are increasing. After achieving high coverage of COVID-19 vaccination, therapeutic drugs have become important for future SARS-CoV-2 variant outbreaks. Although many monoclonal antibodies have been approved for emergency use as treatments for SARS-CoV-2 infection, some monoclonal antibodies are not authorized for variant treatment. Broad-spectrum monoclonal antibodies are unmet medical needs. METHODS: We used a DNA prime-protein boost approach to generate high-quality monoclonal antibodies. A standard ELISA was employed for the primary screen, and spike protein-human angiotensin-converting enzyme 2 blocking assays were used for the secondary screen. The top 5 blocking clones were selected for further characterization, including binding ability, neutralization potency, and epitope mapping. The therapeutic effects of the best monoclonal antibody against SARS-CoV-2 infection were evaluated in a hamster infection model. RESULTS: Several monoclonal antibodies were selected that neutralize different SARS-CoV-2 variants of concern (VOCs). These VOCs include Alpha, Beta, Gamma, Delta, Kappa and Lambda variants. The high neutralizing antibody titers against the Beta variant would be important to treat Beta-like variants. Among these monoclonal antibodies, mAb-S5 displays the best potency in terms of binding affinity and neutralizing capacity. Importantly, mAb-S5 protects animals from SARS-CoV-2 challenge, including the Wuhan strain, D614G, Alpha and Delta variants, although mAb-S5 exhibits decreased neutralization potency against the Delta variant. Furthermore, the identified neutralizing epitopes of monoclonal antibodies are all located in the receptor-binding domain (RBD) of the spike protein but in different regions. CONCLUSIONS: Our approach generates high-potency monoclonal antibodies against a broad spectrum of VOCs. Multiple monoclonal antibody combinations may be the best strategy to treat future SARS-CoV-2 variant outbreaks.

Mechanistic insights into H2 evolution via water splitting at the expense of B2(OH)4: a theoretical study.

H2 has been comprehensively deemed a promising potential candidate to replace traditional fossil fuel-based energy. Typically, the hydrolysis of most hydrogen-rich boron hydrides (e.g. NaBH4, NH3BH3 and Me2NHBH3) catalyzed by nanomaterials generates H2 with only one H atom supplied by water and the other one by a hydrogen-rich boron hydride. Interestingly, both H atoms of produced H2 are provided by water upon hydrolysis of B2(OH)4. Herein, the catalytic mechanisms of H2 evolution upon water splitting at the expense of B2(OH)4 in its hydrolysis reactions catalyzed by acid, base or metal nanoparticles have been investigated by density functional theory (DFT) calculations. By computational studies, the mechanisms of catalysis by base and metal nanoparticles are basically the same as those speculated from our previous experiments. The previously proposed acid catalytic mechanism has been overturned, however. This study not only provides important insights into the catalytic mechanism for water splitting at the expense of B2(OH)4, but also opens up an exciting opportunity to use water to store H2.

Highly Stable Univalent Copper of a Cu@Al/SBA-15 Nanocomposite Catalyzes the Synthesis of Fluorescent Aminobenzotriazoles Derivatives.

With the development of green chemistry, it is still a challenge to maintain the unstable valence state of the metal in heterogeneous catalysts and realize new catalytic synthesis methods. In this paper, it is reported that an univalent copper nanocomposite (Cu@Al/SBA-15) can efficiently catalyze the formation of novel amino-containing benzotriazoles with great fluorescence properties in a new synthetic strategy. Subsequently, its application is further verified by an acylation reaction to produce a series of novel benzotriazoles derivatives with high yield. It is worth noting that the Cu@Al/SBA-15 nanocomposites not only enable the reaction completed with high yield in a short time, but can also be recycled many times without a significant reduction in activity, and the leaching of copper and aluminum species in reaction system is negligible. Finally, the detailed and feasible reaction mechanism is also provided.

Solvent Effect on Excited-State Intramolecular Proton-Coupled Charge Transfer Reaction in Two Seven-Membered Ring Pyrrole-Indole Hydrogen Bond Systems.

In the past decades, tremendous efforts have been invested into organic molecules involved in the excited-state intramolecular proton transfer (ESIPT) reaction due to their enormously Stokes-shifted fluorescence and distinctive photophysical properties. The alterations of the environmental medium can effectively adjust the luminous performance of ESIPT molecules, which inspires us to unravel the solvent effect on the ESIPT mechanism. Here, we report the solvent-dependent excited-state properties of two new seven-membered ring pyrrole-indole ESIPT molecules, g-PPDBI and e-PPDBI, by steady-state spectra, picosecond transient fluorescence spectra, femtosecond transient absorption spectra, and theoretical calculations. The bathochromic-shifted normal fluorescence and the negligibly shifted tautomer fluorescence suggest the occurrence of an excited-state intramolecular proton-coupled charge transfer reaction. Thus, the solvent effect plays a vital role in stabilizing the intramolecular charge transferred state, resulting in a higher ESIPT reaction barrier in more polar solvents. Additionally, the observation of the slight dynamic difference between PPDBIs with different π-conjugation positions provides a new strategy to adjust the performance of ESIPT molecules.